How to install your acrylic with standoff hardware
Tools you need: Drill with drill bit size 3/16, level, hammer and screwdriver
1-Use the acrylic holes as your template
2-Make sure its leveled
3-Mark your holes
4-Drill holes into the wall
5-Insert anchors into the hole and tap flush with hammer. If hole isn’t big enough anchor will bend.
6-Place the screw through the barrel of the hardware
7-Use a screwdriver to attach the barrel into the wall
8-Insert the cap screw hardware through the acrylic hole
9-Screw cap hardware into the barrel and slightly tighten
**Best if you do not tighten the cap screw all the way until you have all of them in place.
*** HARDWARE and if purchased MARKERS are located in a box within the packaging. PLEASE DO NOT THROW THIS BOX OUT.